Dialogic boards not answering call
Posted: Thu Jun 08, 2006 9:37 am
Hello,
I have a 4 port development system that I have used in the past, and have recently tried to use again. When I call into the system, the platform does not answer the call. I have tested the telephone lines going into the analog dialogic board using a telephone, and that works fine. Every time I start the platform, an error log is created with the following contents:
error no_ani 0 [08/Jun/2006:08:30:13 -0400] 000001;000;0000000000 gc_OpenEx(:P_pdk_na_an_io:V_dxxxB1C1, EV_ASYNC) Failed
error no_ani 0 [08/Jun/2006:08:30:13 -0400] 000001;000;0000000000 gcValue = 0x8f
error no_ani 0 [08/Jun/2006:08:30:13 -0400] 000001;000;0000000000 gcMsg = dt_open failed
error no_ani 0 [08/Jun/2006:08:30:13 -0400] 000001;000;0000000000 ccLibId = 4
error no_ani 0 [08/Jun/2006:08:30:13 -0400] 000001;000;0000000000 ccLibName = GC_PDKRT_LIB
error no_ani 0 [08/Jun/2006:08:30:13 -0400] 000001;000;0000000000 ccValue = 0x30
error no_ani 0 [08/Jun/2006:08:30:13 -0400] 000001;000;0000000000 ccMsg = dt_open failed
error no_ani 0 [08/Jun/2006:08:30:13 -0400] 000001;000;0000000000 additionalInfo =
error no_ani 0 [08/Jun/2006:08:30:13 -0400] 000001;000;0000000000 Channel init failed, sending SigInt
error no_ani 0 [08/Jun/2006:08:30:13 -0400] 000001;000;0000000000 gc_Close(dxxxB1C1) Failed
error no_ani 0 [08/Jun/2006:08:30:13 -0400] 000001;000;0000000000 gcValue = 0x43
error no_ani 0 [08/Jun/2006:08:30:13 -0400] 000001;000;0000000000 gcMsg = Invalid linedevice
error no_ani 0 [08/Jun/2006:08:30:13 -0400] 000001;000;0000000000 ccLibId = 0
error no_ani 0 [08/Jun/2006:08:30:13 -0400] 000001;000;0000000000 ccLibName = GLOBALCALL
error no_ani 0 [08/Jun/2006:08:30:13 -0400] 000001;000;0000000000 ccValue = 0x43
error no_ani 0 [08/Jun/2006:08:30:13 -0400] 000001;000;0000000000 ccMsg = Invalid linedevice
error no_ani 0 [08/Jun/2006:08:30:13 -0400] 000001;000;0000000000 additionalInfo =
I am not sure what has changed, but no matter what I try, the platform will not answer the call (rings set to 0). Do you have any suggestions on what to try next?
Thank you.
Lou abbruzzesi
I have a 4 port development system that I have used in the past, and have recently tried to use again. When I call into the system, the platform does not answer the call. I have tested the telephone lines going into the analog dialogic board using a telephone, and that works fine. Every time I start the platform, an error log is created with the following contents:
error no_ani 0 [08/Jun/2006:08:30:13 -0400] 000001;000;0000000000 gc_OpenEx(:P_pdk_na_an_io:V_dxxxB1C1, EV_ASYNC) Failed
error no_ani 0 [08/Jun/2006:08:30:13 -0400] 000001;000;0000000000 gcValue = 0x8f
error no_ani 0 [08/Jun/2006:08:30:13 -0400] 000001;000;0000000000 gcMsg = dt_open failed
error no_ani 0 [08/Jun/2006:08:30:13 -0400] 000001;000;0000000000 ccLibId = 4
error no_ani 0 [08/Jun/2006:08:30:13 -0400] 000001;000;0000000000 ccLibName = GC_PDKRT_LIB
error no_ani 0 [08/Jun/2006:08:30:13 -0400] 000001;000;0000000000 ccValue = 0x30
error no_ani 0 [08/Jun/2006:08:30:13 -0400] 000001;000;0000000000 ccMsg = dt_open failed
error no_ani 0 [08/Jun/2006:08:30:13 -0400] 000001;000;0000000000 additionalInfo =
error no_ani 0 [08/Jun/2006:08:30:13 -0400] 000001;000;0000000000 Channel init failed, sending SigInt
error no_ani 0 [08/Jun/2006:08:30:13 -0400] 000001;000;0000000000 gc_Close(dxxxB1C1) Failed
error no_ani 0 [08/Jun/2006:08:30:13 -0400] 000001;000;0000000000 gcValue = 0x43
error no_ani 0 [08/Jun/2006:08:30:13 -0400] 000001;000;0000000000 gcMsg = Invalid linedevice
error no_ani 0 [08/Jun/2006:08:30:13 -0400] 000001;000;0000000000 ccLibId = 0
error no_ani 0 [08/Jun/2006:08:30:13 -0400] 000001;000;0000000000 ccLibName = GLOBALCALL
error no_ani 0 [08/Jun/2006:08:30:13 -0400] 000001;000;0000000000 ccValue = 0x43
error no_ani 0 [08/Jun/2006:08:30:13 -0400] 000001;000;0000000000 ccMsg = Invalid linedevice
error no_ani 0 [08/Jun/2006:08:30:13 -0400] 000001;000;0000000000 additionalInfo =
I am not sure what has changed, but no matter what I try, the platform will not answer the call (rings set to 0). Do you have any suggestions on what to try next?
Thank you.
Lou abbruzzesi