We've Moved! Please visit our new and improved forum over at our new portal: https://portal.plumvoice.com/hc/en-us/community/topics

Why does the platform have more than one ethernet port?

Answers to common Plum iOn questions

Moderators: admin, support

Locked
support
Posts: 3632
Joined: Mon Jun 02, 2003 3:47 pm
Location: Boston, MA
Contact:

Why does the platform have more than one ethernet port?

Post by support »

On systems built on the HP ProLiant DL380, there are three ethernet ports: two built into the motherboard and one on a PCI card (which it shares with a video port and a PS/2 port). The two built into the motherboard are standard interfaces for the server: in most cases you should only have to plug in port 1. The ethernet interface on the PCI card is for the remote management board which allows out-of-band access to the server. You'll need to plug this interface in to remote manage the server.

On systems built on the HP ProLiant ML330, there are two ethernet ports: one that shares a PCI slot with a single video port and another one that shares a PCI slot with a video port and a PS/2 port. The former is the system's network interface. The latter is the interface for the remote management board (as described in the previous paragraph).

Locked